[PREVIEW]

This document contains all the information relating to the deployment of version 2.6.1 for CloudPoints and Vgate.

Informations related to Cloudpoints

Number	Category	Name	Description
AP-838	UI	Additional Coudpoint information shown on GUI	Newly introduced Access Point parameters on UI showing the serial number and the mac address will help to correctly identify and locate the Access Point physically in the shop.
AP-1022	UI	Name change	Display of device Cloudpoint has been corrected according to Vusion Group Naming Guidelines to “SESimagotag_Cloudpoint”

Number	Name	Description
AP-770	Vulnerability for updated APs	After the update from version 2.5.0 to 2.6.0, it was possible to get root access without entering password. This has been corrected for 2.6.1
AP-928	Remote host check causing unnecessary logs on on-premise	This has been removed, option “Provisioning” is disabled in order not to create too many log entries and confuse customers.
AP-1032	HF protocol windows size setting (7/14) not bound to regional setting	Instead of configuring the HF protocol window size (7 or 14) directly via the Web GUI, Service Mode, or Provisioning, this setting is now determined by the selected region for consistency. This change addresses issues encountered in previous versions.
AP-1078	Jumping channel issue	In very rare cases the Cloudpoint used ESL channel 0 for communication to ESLs instead of the configured ESL channel (i.e. option “managed” selected for ESL channel). This is now corrected.
AP-1077	Logging changes	Stay with log4cxx library but switching off remote appender and changing formatting to PLOG style (CSV type).

Informations related to VGate

Number	Category	Name	Description
AP-1059	Serviceability	Improved SW-Update mechanism	Prior software update mechanism has shown some issues in cases when there is a big network latency during update. The software update mechanism has been improved to handle all kinds of network loss, interruption or latency. The software update is possible from version 2.5.0 to version 2.6.1 and from version 2.6.0 to version 2.6.1.
AP-1021	UI	Name change	Display of device in VusionManager has been corrected according to VusionGroup naming guidelines to “SESImagotag_VGate_E1-G1”
AP-988	Serviceability	Logging	Improved and state-of-the art logging library (PLOG) with smaller footprints and less memory requirements. Catching logs for troubleshooting will be more accurate and straightforward in future.
AP-1053	Serviceability	Logging	For analyzing issues during a (manual or automatic) reboot, new “crash-logs” are introduced. Those will help to analyze why devices did not reboot correctly and do not come online after a reboot. This increases troubleshooting options.
AP-838	UI	Additional VGate information displayed on VusionManager	Newly introduced Access Point parameters on VusionManager displaying the serial number and the MAC address will help to correctly identify and locate the device physically in the shop.

Number	Category	Description
AP-928	Remote host check causing unnecessary logs for on-premise	Option “Provisioning” is disabled in order not to create too many log entries and confuse customers.
AP-1032	HF protocol windows size setting (7/14) not bound to regional setting	Instead of setting the window size of the HF protocol (can be either 7 or 14) directly through Web-GUI, Servicemode or Provisioning this is replaced by setting the region setting (e.g. EMEA or US) to be consistent. This had caused issues in prior versions.